Request Info


Automatic Sliding Pedestrian DoorsICU and CCU Patient Room Access DoorsAutomatic Swing Door Operators and EntrancesAutomatic Doors for The DisabledAutomatic Bifolding DoorsAutomatic Industrial DoorsAutomatic Serving WindowsRevolving Doors
Manual revolving entrance doorsAutomatic revolving doorSecurity and card access revolving doorsLarge diameter automatic revolving doors

* Not all product details are available at this website.  Try http://www.hortondoors.com for more details.

Specifications

Horton model 9331 automatic revolving door.

PLAN and ELEVATION
Model 9331 3-Wing/Segmented with Round Canopy
(Round Drum Wall Optional - Model 9330)

9331E.DXF (88k)

Other Sections and Details
Canopy Head Detail   Sill Detail at Drum
Detail at Bottom Bearing    Detail at Center Shaft

Problem Downloading DXF File?
Some browsers will open a DXF file as a text document.
If this happens, try right clicking the link above, then select "Save Target As".

  • Door Construction
    Extruded aluminum stile and rail door panels.
    Narrow or medium stiles.
    Prep'd for ¼" flat glass or 1" insulated glass.
    7/16" or 9/16" laminated bent glass..
    Cushioned safety stop throat edges.
    204R1 clear or 313R1 dark bronze anodized finishes.

  • Automatic Door Operator
    Electromechanical door operator.
    Microprocessor control.
    Adjustable back pressure safety stop

  • Available Options
    Ceiling lights.
    Cropped canopies.
    Round canopies on segmented drum walls.
    Extended canopy heights.
    Kynar 500 and XL painted finishes.
    Stainless steel or bronze muntz metal clad finishes.
    Other special finishes are available, consult Eastern Door Service.

Segmented Doors

I.D. x Dr. Height

Model 9331
Three Wing Door

Model 9341
Four Wing Door

8'-0" x 7'-0"

Yes

---

9'-0" x 7'-0"

Yes

Yes

10'-0" x 7'-0"

Yes

Yes

 

Round Doors

I.D. x Dr. Height

Model 9330
Three Wing Door

Model 9340
Four Wing Door

8'-0" x 7'-0"

Yes

---

9'-0" x 7'-0"

Yes

Yes

10'-0" x 7'-0"

Yes

Yes

| Home |    | Site Map |    | Contact Us |
| Products |    | Manufacturers |    | Services |    | Information |
| Privacy Policy |    | Terms of Use |
| Fun Stuff |    | Links |
| Jobs at EDS |

Page Last Updated Tuesday, June 15, 2004
By Charles F. Vetter